| 产地类别 | 进口 |
|---|
用于双光子显微镜的电光调制器系统
Conoptics是光学和激光附件制造业的，开发了一套用于多光子显微镜的电光调制器。
多光子荧光显微镜结合了*进的激光扫描显微镜技术，使用红外波长获取更高分辨率的三维图像，多光子荧光显微镜是非常实用的研究工具。
Conoptics调制器采用KD*P晶体，光束从中心入射，中心出射，标准的波长范围从700nm到1100nm。电源使用Model 302RM，拥有1us的上升和下降沿的时间，可作为一个250KHz高速开关，并且可作为一个强度调制器。
用于双光子显微镜的电光调制器系统
调制器参数：
Aperture | 3.5mm |
Dimensions | 50mm Diameter * 135mm |
Transmission | >90% |
Standard Wavelength Ranges | 700-1100nm |
Piezo Resonances | Minimal with clamped version(BK option) |
Driver Compatibility | Full modulation with M302 Power Amplifier up to 1064nm |
放大器参数：
Cabinet | Driver and power supply in single cabinet |
Test Feature | Built-in test feature allows testing for max transmission of Pockel Cell with out adjusting bias voltage |
DC Bias | Improved DC biasing of Pockel Cell provides greater linearity at higher bias voltages |
Voltage Range | +/- 450VDC controlled by ten-turn front panel pot. Digital meter monitors differential bias applied to E.O. Modulator |
Linearity | 10bits referenced to full scale (.1%) |
Bandwidth | DC to >200Khz with 90pf load and 3M (RG-62) cables |
Max. Output Drive Level | 750VP-P into 90pf load |
Amplifier Input Signal | 2VP-P max into 50/1K ohms delivers 750VP-P out |
Input Signal Format | Options include Unipolar positive, negative or bipolar |
Input Power (AC) | 60W typical. Input power is both load (modulator) and frequency dependent. |
Dimensions | 19” Rack Mountable, 5.25”H(133mm) (3U) x 14”D (356mm) |
Cooling | Forced air |
Operating Environment | Designed for laboratory use (indoor only) Temperature range +5deg C to +50deg C ambient Humidity 20%-80% RH up to 32deg C Altitude <3000M |
Weight | 20lbs (9.07kg) |
上海市徐汇区虹梅路2007号6号楼289楼
